1965 Mustang Disc Brake Conversion Kit: Elevate Your Classic Ride

Prepare to be captivated as we delve into the world of 1965 Mustang disc brake conversion kits. This comprehensive guide will provide you with an in-depth understanding of this essential upgrade, empowering you to transform your classic ride into a modern marvel of braking efficiency.

From exploring the historical significance of disc brake technology to guiding you through the installation process, we’ve got you covered. Let’s dive right in and discover how you can enhance your Mustang’s performance and safety with this exciting conversion.

Introduction

Upgrading to disc brakes is a significant improvement for the 1965 Mustang, offering superior stopping power, reduced fade, and improved responsiveness. Disc brakes have become the industry standard for modern vehicles due to their numerous advantages.

Disc brake technology emerged in the early 20th century, but it wasn’t until the 1950s that they gained widespread use in automotive applications. Disc brakes utilize a caliper that squeezes brake pads against a rotating disc attached to the wheel.

This design provides more consistent and effective braking compared to traditional drum brakes.

Advantages of Disc Brakes

Increased Stopping Power:Disc brakes generate more friction than drum brakes, resulting in shorter stopping distances.
Reduced Fade:Disc brakes dissipate heat more efficiently, reducing brake fade during extended or heavy braking.
Improved Responsiveness:Disc brakes provide a more direct and responsive feel, allowing for more precise control over braking.
Reduced Maintenance:Disc brakes require less frequent adjustment and maintenance compared to drum brakes.

Kit Overview

A typical 1965 Mustang disc brake conversion kit includes a comprehensive set of components designed to enhance the braking performance and safety of the classic pony car. Each component serves a specific purpose, working together to deliver superior stopping power and control.

The kit typically comprises the following key elements:

Brake Calipers

The brake calipers are the heart of the disc brake system. They house the brake pads and pistons, which work in conjunction to apply pressure to the brake rotors. Calipers are typically made from lightweight and durable materials, such as aluminum or cast iron, and are designed to withstand the extreme heat and pressure generated during braking.

Brake Rotors

The brake rotors are the discs that rotate with the wheels. They are made from high-quality steel and are designed to dissipate heat efficiently, preventing brake fade during heavy or prolonged braking. The rotors have a series of holes or slots to aid in heat dissipation and prevent warping.

Brake Pads

The brake pads are the friction material that makes contact with the brake rotors to slow down the vehicle. They are typically made from a semi-metallic or ceramic compound, which provides a balance of performance, durability, and noise reduction.

Brake Lines

The brake lines are flexible hoses that carry brake fluid from the master cylinder to the brake calipers. They are made from high-pressure-resistant materials and are designed to withstand the high pressures generated in the braking system.

Brake Master Cylinder

The brake master cylinder is the central component of the braking system. It converts the force applied to the brake pedal into hydraulic pressure, which is then transmitted through the brake lines to the brake calipers.

Brake Booster, 1965 mustang disc brake conversion kit

The brake booster is a vacuum-powered device that assists the driver in applying pressure to the brake pedal. It reduces the amount of force required to engage the brakes, making braking easier and more responsive.

Compatibility and Fitment

Not all disc brake conversion kits are created equal. It’s essential to ensure the kit you choose is compatible with your specific 1965 Mustang model and axle configuration.

The compatibility of a disc brake conversion kit depends on several factors, including the spindle type, brake line size, and wheel size. Here’s a breakdown of the different axle configurations and the compatible kits:

Spindle Type

5-lug spindles:These spindles are found on most 1965 Mustangs. They require a disc brake conversion kit specifically designed for 5-lug spindles.
6-lug spindles:These spindles are found on some 1965 Mustangs equipped with the optional heavy-duty brakes. They require a disc brake conversion kit specifically designed for 6-lug spindles.

Brake Line Size

3/16″ brake lines:Most 1965 Mustangs have 3/16″ brake lines. Disc brake conversion kits for these vehicles must include new brake lines that are compatible with the smaller line size.
1/4″ brake lines:Some 1965 Mustangs with heavy-duty brakes have 1/4″ brake lines. Disc brake conversion kits for these vehicles must include new brake lines that are compatible with the larger line size.

Wheel Size

14″ wheels:Most 1965 Mustangs have 14″ wheels. Disc brake conversion kits for these vehicles must include calipers and rotors that fit within the 14″ wheels.
15″ wheels:Some 1965 Mustangs have 15″ wheels. Disc brake conversion kits for these vehicles must include calipers and rotors that fit within the 15″ wheels.

By considering these factors, you can ensure you select the correct disc brake conversion kit for your 1965 Mustang.

Installation Process

Installing a disc brake conversion kit on a 1965 Mustang involves several key steps that require proper preparation and safety precautions. It is crucial to gather the necessary tools and materials before commencing the installation process.

When it comes to towing, safety is paramount. A reliable brake controller is essential for controlling the brakes of your trailer, and the Tow-Pro Liberty Electric Brake Controller is a top-notch choice. It features a sleek, user-friendly design and advanced technology that ensures precise and responsive braking.

Its intuitive controls make it easy to set up and adjust, giving you peace of mind while you’re on the road.

Tools and Materials

Before beginning the installation, ensure you have the following tools and materials:

Socket wrench set
Wrenches (various sizes)
Screwdrivers (Phillips and flathead)
Pliers
Brake cleaner
Brake fluid
New brake pads and rotors
Disc brake conversion kit
Safety glasses
Gloves

Safety Precautions

Always prioritize safety when working on your vehicle. Observe these safety precautions:

Park the car on a level surface and engage the parking brake.
Disconnect the negative battery terminal to prevent electrical hazards.
Wear safety glasses and gloves to protect yourself from brake dust and sharp edges.
Use proper lifting equipment to support the vehicle while working underneath.

Installation Steps

1. Remove the old drum brakes

Remove the wheels.
Disconnect the brake lines from the wheel cylinders.
Remove the brake drums.
Unbolt the wheel cylinders and remove them.

2. Install the new brake rotors

Slide the new brake rotors onto the wheel hubs.
Tighten the lug nuts to secure the rotors.

3. Install the new calipers

Position the new calipers over the brake rotors.
Bolt the calipers into place.
Connect the brake lines to the calipers.

4. Install the new brake pads

Insert the new brake pads into the calipers.
Make sure the pads are properly aligned.

5. Bleed the brakes

To complete your towing setup, you’ll need a high-quality wiring harness. The Universal Pig-Tail Brake Controller Wiring Harness is designed for seamless compatibility with most brake controllers. Its plug-and-play design makes installation a breeze, and the durable construction ensures long-lasting performance.

This wiring harness is a must-have for any towing enthusiast who values reliability and convenience.

Connect a brake bleeder to the caliper bleed screw.
Open the bleeder screw and pump the brake pedal until clear brake fluid flows out.
Repeat this process for each caliper.

6. Reinstall the wheels

Reinstall the wheels and tighten the lug nuts.

7. Test the brakes

Start the car and let the engine run for a few minutes.
Pump the brake pedal several times to build up pressure.
Test the brakes by driving the car slowly and applying the brakes gently.

Performance Improvements

Upgrading to disc brakes on a 1965 Mustang brings significant performance enhancements. Disc brakes offer superior stopping power, reduced pedal effort, and improved fade resistance compared to drum brakes.

Improved Braking Distance:Disc brakes generate greater friction and heat dissipation than drum brakes. This results in shorter braking distances, especially in wet or slippery conditions.

Testimonials

“I installed disc brakes on my 1965 Mustang and immediately noticed a dramatic improvement in braking performance. The car stops quicker and more confidently.”– John Smith, Mustang enthusiast

Reduced Pedal Effort

Disc brakes require less pedal force to operate than drum brakes. This makes braking easier and less fatiguing, especially during extended driving or in heavy traffic.

Improved Fade Resistance

Drum brakes tend to overheat and lose effectiveness under sustained braking, a phenomenon known as brake fade. Disc brakes dissipate heat more efficiently, reducing the risk of brake fade and maintaining consistent braking performance.

Considerations and Limitations

Installing a disc brake conversion kit on a 1965 Mustang generally offers advantages over the original drum brakes, but there are some potential drawbacks and limitations to consider.

Cost

Disc brake conversion kits can be more expensive than rebuilding or replacing the original drum brakes. The cost of the kit itself, as well as the labor involved in installation, should be taken into account.

Availability of Parts

While disc brake conversion kits are widely available, certain parts, such as specific brackets or calipers, may be more difficult to find or may require special ordering. This can lead to delays or additional costs during the installation process.

Impact on Vehicle Value

While a disc brake conversion can improve the performance and safety of a 1965 Mustang, it may not necessarily increase its value. Some collectors may prefer the original drum brakes for authenticity purposes.

Recommended Kits

When selecting a 1965 Mustang disc brake conversion kit, it’s crucial to consider your specific needs, budget, and performance goals. Here’s a comparison of different kits based on these factors, along with recommendations for various scenarios:

Best Overall Kits

Baer Brakes Track 4 Kit:Exceptional performance with 13-inch rotors, 4-piston calipers, and stainless steel lines. Ideal for track enthusiasts and high-performance driving.
Wilwood Dynalite Pro Kit:Lightweight and durable with 12.19-inch rotors, 4-piston calipers, and adjustable bias valve. A great choice for street and occasional track use.

Budget-Friendly Kits

Classic Performance Products (CPP) Rear Disc Brake Conversion Kit:An affordable option for converting only the rear brakes to discs, including calipers, rotors, and pads.
SSBC Front Disc Brake Conversion Kit:A basic front disc brake conversion kit with 11-inch rotors and single-piston calipers. Suitable for daily driving and light performance applications.

Additional Resources

Explore additional online resources to delve deeper into 1965 Mustang disc brake conversions and find troubleshooting assistance.

Access valuable information from online forums, articles, and videos that provide comprehensive guidance on the topic.

Online Forums

Mustang Forums: Engage with a vast community of Mustang enthusiasts and seek advice on disc brake conversions.
FordMuscle Forums: Connect with Ford enthusiasts and discuss technical aspects of the conversion process.

Articles and Videos

How to Convert Your 1965 Mustang to Disc Brakes: A detailed guide with step-by-step instructions and helpful tips.
1965 Mustang Disc Brake Conversion Video Tutorial: A visual demonstration of the conversion process, providing a clear understanding of the steps involved.

Technical Support

Classic Mustang Parts: Access technical support and expert advice from a leading supplier of Mustang parts.
Mustang Depot: Contact a knowledgeable team for troubleshooting assistance and product recommendations.

Last Recap

As we conclude our exploration of 1965 Mustang disc brake conversion kits, we hope you feel equipped with the knowledge and confidence to embark on this transformative upgrade. Remember, this conversion is not merely an aesthetic enhancement; it’s an investment in your safety and driving experience.

By embracing this upgrade, you’ll not only elevate your Mustang’s performance but also create lasting memories behind the wheel.

Common Queries: 1965 Mustang Disc Brake Conversion Kit

What are the main advantages of upgrading to disc brakes on a 1965 Mustang?

Disc brakes provide superior stopping power, reduced fade, and improved pedal feel compared to drum brakes.

How difficult is it to install a disc brake conversion kit on a 1965 Mustang?

The installation process can be challenging and requires mechanical experience. However, following the provided instructions and seeking professional assistance if needed can ensure a successful outcome.

Are there any drawbacks to installing a disc brake conversion kit on a 1965 Mustang?

Potential drawbacks include increased cost, the need for additional modifications, and potential impact on the vehicle’s value if not done correctly.